登录|立即注册
论坛 > 问题反馈
发帖|
看10076|回1|收藏
wuhay 看全部
2023-3-10 09:34:04

U-Boot 2021.10-orangepi (Aug 09 2022 - 21:00:00 +0800) Allwinner Technology

CPU:   Allwinner H616 (SUN50I)
Model: OrangePi Zero2
I2C:   ready
DRAM:  1 GiB
MMC:   mmc@4020000: 0
Loading Environment from FAT... Unable to use mmc 0:1... In:    serial@5000000
Out:   serial@5000000
Err:   serial@5000000
Net:   phy interface7
eth0: ethernet@5020000
Autoboot in 1 seconds, press <Space> to stop
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3566 bytes read in 1 ms (3.4 MiB/s)
## Executing script at 4fc00000
U-boot loaded from SD
Boot script loaded from mmc
Failed to load '/boot/orangepiEnv.txt'
37897 bytes read in 4 ms (9 MiB/s)
Failed to load '/boot/dtb/allwinner/overlay/-fixup.scr'
10737479 bytes read in 445 ms (23 MiB/s)
22259720 bytes read in 920 ms (23.1 MiB/s)
Moving Image from 0x40080000 to 0x40200000, end=417a0000
## Loading init Ramdisk from Legacy Image at 4ff00000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    10737415 Bytes = 10.2 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 4fa00000
   Booting using the fdt blob at 0x4fa00000
   Loading Ramdisk to 495c2000, end 49fff707 ... OK
   Loading Device Tree to 0000000049550000, end 00000000495c1fff ... OK

Starting kernel ...

13859024 看全部
2023-3-22 20:32:24
文件损坏了,需要重刷,或者找个Linux,把TF卡用读卡器接上去,用fsck.ext4或者e2fsck修复一下试试。。

orange pi.

Powered by Discuz! X3.4

首页|简易版|触屏版|电脑版