|
|
楼主 |
发表于 2015-4-21 21:00:53
|
显示全部楼层
Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 4.0.0 (quillan@quillan) (gcc version 4.8.5 20150328 (prerelease) (GCC) ) #5 SMP Tue Apr 21 20:21:54 CST 2015
CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: LeMaker Banana Pi
Ignoring memory range 0x40000000 - 0x48000000
Memory policy: Data cache writealloc
psci: probing for conduit method from DT.
psci: Using PSCI v0.1 Function IDs from DT
PERCPU: Embedded 10 pages/cpu @ef0cc000 s10944 r8192 d21824 u40960
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227856
Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 init=/sbin/init rootwait panic=10
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 903380K/917504K available (4049K kernel code, 192K rwdata, 1192K rodata, 252K init, 233K bss, 14124K reserved, 0K cma-reserved, 139264K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc052673c (5242 kB)
.init : 0xc0527000 - 0xc0566000 ( 252 kB)
.data : 0xc0566000 - 0xc0596300 ( 193 kB)
.bss : 0xc0596300 - 0xc05d0abc ( 234 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
Additional per-CPU info printed with stalls.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 24.00MHz (phys).
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
Switching to timer-based delay loop, resolution 41ns
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
CPU: Testing write buffer coherency: ok
/cpus/cpu@0 missing clock-frequency property
/cpus/cpu@1 missing clock-frequency property
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x483d7940 - 0x483d7998
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (96.00 BogoMIPS).
CPU: All CPU(s) started in HYP mode.
CPU: Virtualization extensions available.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe
platform gmac-3v3: Driver reg-fixed-voltage requests probe deferral
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
platform 1c13400.phy: Driver sun4i-usb-phy requests probe deferral
sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
console [ttyS0] disabled
1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 41, base_baud = 1500000) is a U6_16550A
console [ttyS0] enabled
1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 42, base_baud = 1500000) is a U6_16550A
1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 43, base_baud = 1500000) is a U6_16550A
ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled
ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc
scsi host0: ahci-sunxi
ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 30
platform 1c50000.ethernet: Driver stmmaceth requests probe deferral
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-platform: EHCI generic platform driver
platform 1c14000.usb: Driver ehci-platform requests probe deferral
platform 1c1c000.usb: Driver ehci-platform requests probe deferral
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
platform 1c14400.usb: Driver ohci-platform requests probe deferral
platform 1c1c400.usb: Driver ohci-platform requests probe deferral
usbcore: registered new interface driver usb-storage
sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
sunxi-rtc 1c20d00.rtc: RTC enabled
i2c /dev entries driver
axp20x 0-0034: AXP20x variant AXP209 found
input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
axp20x-regulator axp20x-regulator: regulators node not found
axp20x 0-0034: AXP20X driver loaded
sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
Driver 'mmcblk' needs updating - please use bus_type methods
sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
sunxi-mmc 1c0f000.mmc: Got CD GPIO
sunxi-mmc 1c0f000.mmc: base:0xf00da000 irq:27
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 17
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
mmc0: host does not support reading read-only switch, assuming write-enable
mmc0: new high speed SDHC card at address aaaa
mmcblk0: mmc0:aaaa SS08G 7.40 GiB
mmcblk0: p1 p2
stmmaceth 1c50000.ethernet: no reset control found
Ring mode enabled
No HW DMA feature register supported
Normal descriptors
TX Checksum insertion supported
libphy: stmmac: probed
eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
ehci-platform 1c14000.usb: EHCI Host Controller
ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
ata1: SATA link down (SStatus 0 SControl 300)
ehci-platform 1c14000.usb: irq 28, io mem 0x01c14000
ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-platform 1c1c000.usb: EHCI Host Controller
ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000
ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ohci-platform 1c14400.usb: Generic Platform OHCI controller
ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3
ohci-platform 1c14400.usb: irq 29, io mem 0x01c14400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ohci-platform 1c1c400.usb: Generic Platform OHCI controller
ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4
ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:10 UTC (10)
vcc5v0: disabling
vcc3v0: disabling
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:2.
devtmpfs: mounted
Freeing unused kernel memory: 252K (c0527000 - c0566000)
quillan login: root
login[71]: root login on 'ttyS0'
[root@quillan ~]# |
|
窥视卡
雷达卡
发表于 2015-4-21 20:58:54
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
千斤顶
照妖镜
