OrangePi Zero的WiFi使用问题
Raspbian_server_For_zero_H2+_V0_1.img无法正常通过配置连接WiFi热点。
有两个奇怪的现象，第一wifi是Wlan2，第二是有一个p2p0
p2p0 Link encap:EthernetHWaddr d8:9a:65:61:24:1d
UP BROADCAST MULTICASTMTU:1500Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B)TX bytes:0 (0.0 B)
wlan2 Link encap:EthernetHWaddr d8:9a:65:61:24:1c
UP BROADCAST MULTICASTMTU:1500Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B)TX bytes:0 (0.0 B)
--------------------首先获得PSK的秘密数据-------------------------
root@OrangePI:~# wpa_passphrase TP-LINK_FA747A 11111111
network={
ssid="TP-LINK_FA747A"
#psk="11111111"
psk=953d09d8a152a7200e5dd42c3af20dc3e680de67ed2da66ecda1098555c446f2
}
--------------------然后修改conf配置文件--------------------------
update_config=1
#ctrl_interface=DIR=file:///C:\Users\ADMINI~1.USE\AppData\Local\Temp\LKNIT0K@G.gifar/run/wpa_supplicant GROUP=wheel
network={
ssid="TP-LINK_FA747A"
#psk="11111111"
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk=953d09d8a152a7200e5dd42c3af20dc3e680de67ed2da66ecda1098555c446f2
priority=1
}
----------------------执行配置------------------------
wpa_supplicant -i wlan2 -c /etc/network/wpa_supplication.conf
------------------结果无法连接----------------------
Successfully initialized wpa_supplicant
wlan2: SME: Trying to authenticate with 28:2c:b2:fa:74:7a (SSID='TP-LINK_FA747A' freq=2462 MHz)
wlan2: Trying to associate with 28:2c:b2:fa:74:7a (SSID='TP-LINK_FA747A' freq=2462 MHz)
wlan2: Associated with 28:2c:b2:fa:74:7a
wlan2: CTRL-EVENT-DISCONNECTED bssid=28:2c:b2:fa:74:7a reason=3 locally_generated=1
wlan2: SME: Trying to authenticate with 28:2c:b2:fa:74:7a (SSID='TP-LINK_FA747A' freq=2462 MHz)
wlan2: Trying to associate with 28:2c:b2:fa:74:7a (SSID='TP-LINK_FA747A' freq=2462 MHz)
wlan2: Associated with 28:2c:b2:fa:74:7a
wlan2: CTRL-EVENT-DISCONNECTED bssid=28:2c:b2:fa:74:7a reason=3 locally_generated=1
wlan2: SME: Trying to authenticate with 28:2c:b2:fa:74:7a (SSID='TP-LINK_FA747A' freq=2462 MHz)
---------------------------------------------------------
但是通过wpa_cli命令的方式倒是可以连接热点
> scan
OK
scan_r
bssid / frequency / signal level / flags / ssid
28:2c:b2:fa:74:7a 2462 -43 TP-LINK_FA747A
88:25:93:93:52:69 2462 -69 jingyunOnline
>add_network
0
>set_network 0 ssid “TP-LINK_FA747A”
ok
> set_network 0 psk "11111111"
OK
> select_network 0
OK
> enable_network 0
OK
>list_n
network id / ssid / bssid / flags
0 TP-LINK_FA747A any
-------------获取IP地址-----------------------------------
udhcpc -i wlan2
-------------------------------------------------------------
wlan2 Link encap:EthernetHWaddr d8:9a:65:61:24:1c
inet addr:file:///C:\Users\ADMINI~1.USE\AppData\Local\Temp\%W@GJ$ACOF(TYDYECOKVDYB.png192.168.2.108Bcast:file:///C:\Users\ADMINI~1.USE\AppData\Local\Temp\%W@GJ$ACOF(TYDYECOKVDYB.png192.168.2.255Mask:file:///C:\Users\ADMINI~1.USE\AppData\Local\Temp\%W@GJ$ACOF(TYDYECOKVDYB.png255.255.255.0
UP BROADCAST RUNNING MULTICASTMTU:1500Metric:1
RX packets:82 errors:0 dropped:6 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:11356 (11.0 KiB)TX bytes:1624 (1.5 KiB)
--------------------------------------------------------------
现在不知道如何配置conf文件才能让WiFi正常工作？
页:
[1]